Crankshaft Grinding Machine
Crankshaft Grinding Machine : CG - 1700
CG - 1700		  
Technical Specifications
Maximum Grinding Length 1700 mm
Maximum Stroke 210 mm
Maximum Table Traverse 2 x 943 mm
Rapid Hydraulic Traverse for Wheel Head 150 mm

Back
[ Back ]
Vertical Fine Boring and Milling Machine
  Vertical Fine Boring and Milling Machine       CB - 1000
         CB - 1500
       CBM - 1500
       CBM - 1500
Technical Specifications
  Cb - 1500 / Cbm - 1500 Cbm - 2500
Boring Capacity in (dia.) 48 - 200 mm 48 - 260 mm
(With Standard Equipment) (1.90"-8") (1.90"-10.20")
Boring Capacity in (dia.) 32 - 260 mm 32 - 260 mm
With Optional Equipment (1.25"-10.30") (1.25"-10.30")
Quick return of boring head 840 mm / min 840 mm / min
Motor Power (1.5 kw) 2 HP 1000 rpm 3 phase 50 HZ TEFC
Milling Length 1150 mm 2500 mm
(CBM version only) (45.3") (98")
Milling Width 350 mm 400 mm
(CBM version only) (13.8") (15.7")

Back
[ Back ]
Tool Grinders
Tool Grinders
TG - 100
Technical Specifications
Grinding Wheel Diameter 150 mm
Lapping Wheel Diameter 150 mm
Motor 0.5 HP, 3 PH, 420 v, 50 HZ 2800 rpm

Back
[ Back ]
Horizontal Lineboring Machines
Horizontal Lineboring Machines - Linebore H - 1550 / H - 2500
Linebore H - 1550
                 H - 2550
 
Technical Specifications
Maximum Length of the Block 1550 mm
Distance from Built-in Parallels to Boring Bar Max. / Min. 815 mm / 515 mm
Boring Capacity 34 - 150mm
Spindle Speeds (rpm) Indefinitely variable from
50 - 750 rpm in two steps.
Feed : Both directions roughing 0.15 mm
(Automatic and Manual) Finishing 0.04 mm
Maximum Travel of Boring Bar 325 mm
Drive Motor (440 V, 50 ~) 1.5 HP Three Phase

Back
[ Back ]
Valve Seat Cutting Machine
Valve Seat Cutting Machine : Seatcut 20100
Seatcut 20100		  
Technical Specifications
Capacity for cutting valve seats of width 1-8 mm and seat diameter 20-100 mm.
No lapping needed after cutting operation.
Suitable for all Indian Vehicles.

Back
[ Back ]